Call Us: 305.992.7218 | E-Mail: aangelo@e3expander.com

Products

E3Expander™ Chemical Application Formula per Gallon

Suggested retail price: Please call

Available direct to growers
Minimum Order either 5 gallons or 275 gallons

DIRECTIONS FOR CHEMICAL APPLICATION FORMULA (ground/aerial spray applications)
Always read and follow all directions

1. Make sure tank is cleaned and completely flushed.
2. Fill tank to 1⁄2 of the total amount of water.
3. Begin agitation/recirculation.
4. Use 1:300 dilution ratio, or 0.427 ounces per gallon of water.
5. Add E3Expander™ slowly while adding remaining water required.
6. Agitate/recirculate until E3Expander™ is completely dissolved.
7. E3Expander in water will appear nearly clear.
8. Add desired chemicals per their directions, while continuing vigorous agitation.
9. Reduce chemical application rate by 30%.
10. Do not breathe spray mist.

PRODUCT ATTRIBUTES
E3Expander™ is a polymer type concentrate, (protected by US Patents pending) which when placed into solution with water and mixed with appropriate agricultural chemicals enhances wetting, adhesion and facilitates redistribution with ambient moisture, thereby increasing protection during plant growth. Provides protection against phytotoxicity and aids as a drift retardant. Some thermal protection may also be provided at higher concentrations. E3Expander™ should be applied with the first and all subsequent sprays.E3Expander™ aids in fruit, foliar and systemic applications. The use of E3Expander™ allows longer durations between chemical applications, resulting in less total chemical usage.

AGRICULTURE USE: After thoroughly mixing E3Expander™ with water, at the appropriate dilution ratio, add chemicals while continuing agitation to allow proper dispersion of ingredients in the diluted E3Expander™matrix. Most Agriculture spray equipment with either in tank mixing or tank to pump recirculation will suffice. Regardless of method of application, thorough wetting of all surfaces must be accomplished for best results.E3Expander™ may be used with most agricultural products unless individual labels of the products specifically prohibit polymers. Evaluation of chemical compatibility including consistency is the sole responsibility of the user. For further information, please refer to the Safety Data Sheet, available at www.e3expander.com

PRODUCT EXPIRES 1 YEAR FROM DATE OF MANUFACTURE

E3Expander™ Chemical Application Formula SDS

E3Expander™ Fertigation Formula

Suggested retail price: Please call

275 gallons (1 tote) minimum order

DIRECTIONS FOR FERTIGATION FORMULA for PIVOTS
Always read and follow all directions
1. Calculate center pivot revolution time to treat the desired acres assuming 1/10th of an inch of water for application.
2. Inject 0.5 gallons of E3Expander™ per acre. (for slow moving pivots add water to E3Expander™ Fertigation formula and set injection pump accordingly).
3 .Reduce fertigation rate by center pivot injection by 30%.
4. Apply liquid injectable fertilizer immediately following E3expander™ application.

PRODUCT ATTRIBUTES (fertigation):
E3Expander™ is a polymer type concentrate, (protected by U S. Patents Pending) which when injected through a center pivot at the appropriate injection rate prior to fertigation with fertilizer enhances wetting, adhesion and facilitates redistribution with ambient moisture, thereby increasing protection during plant growth. E3Expander™ reduces liquid injectable fertilizer application by 30%. E3Expander™ is particularly valuable in reducing the amount of nitrogen necessary on crops by as much as 30%. In the case of high nitrate water, above 10ppm or mg/L, E3Expander™ will actually bond to high nitrate water and may reduce entirely, the need for nitrogen. In addition, if your irrigation water tests over 10.0ppm or mg/L you should take advantage of the useable nitrogen in the water. E3Expander™ aids in fruit, foliar and systemic applications. E3Expander™ is designed to hold fertilizer in place longer and greatly reduces excess nitrate accumulation below the root zone in soil and ground water over time. You can find more information at the University of California Department of Natural Resources: http://ucanr.edu/blogs/blogcore/postdetail.cfm? postnum=9361

AGRICULTURE USE: In the event of high nitrate water conditions (10.0ppm or mg/l or higher) E3Expander™ can in extreme cases (above 50ppm or 50 mg/L) reduce or possibly eliminate the need for additional nitrogen. In high nitrate water conditions E3Expander™ will bond with the existing nitrates to make them available to the plants. The amount of nitrogen available from irrigation water can be estimated by taking the nitrate concentration times 2.72 for each 12” depth of water applied.

Evaluation of chemical compatibility including consistency is the sole responsibility of the user. For further information, please refer to the MSDS, available at www.e3expander.com

PRODUCT EXPIRES 1 YEAR FROM DATE OF MANUFACTURE

E3Expander™ Fertigation Formula SDS

EXCLUSIVE TO AG COOPERATIVES E3Expander™ Fertilizer Application Formula for In-Furrow, Side-by-Side, Strip-Till, and Sprayer applications per Gallon

Suggested retail price: Please call
Minimum Order either 5 gallons or 275 gallons

DIRECTIONS FOR LIQUID FERTILIZER APPLICATION (sprayer):
Always read and follow all directions

1. Make sure tank is cleaned and completely flushed.
2. Directions assume a 900 gallon tank.
3. Mixing ratio with liquid fertilizer is 1:300.
4. Mix 3 gallons of E3Expander™ with 300 gallons of water until diluted in tank.
5. Gradually add to tank additional 600 gallons of fertilizer while agitating/recirculating/
6. E3Expander™ is drift retardant to 19 mph wind.
7. Reduce fertilizer application rate by 30% when spraying product.
8. E3Expander™ Fertilizer Application Formula in solution will appear nearly clear.
9. Do Not breathe mist.

PRODUCT ATTRIBUTES (fertilizer application):
E3Expander™ is a polymer type concentrate, (protected by U.S. Patents pending) which when placed into solution with water and mixed with appropriate agricultural fertilizer enhances wetting, adhesion and facilitates redistribution with ambient moisture, thereby increasing protection during plant growth. Provides protection against phototoxicity and aids as a drift retardant in spray applications. Some thermal protection may also be provided at higher concentrations. E3Expander™ reduces fertilizer application by 30% when applied by sprayer application.

For systemic application by in-furrow/side-by-side/strip-till do not reduce application rate as E3Expander™is designed to hold fertilizer in place longer and greatly reduces excess nitrate accumulation below the root zone in soil and ground water over time.

E3Expander™ is particularly valuable in reducing the amount of nitrogen necessary on crops by as much as 30% depending on application. In the case of high nitrate water, above 10ppm or mg/L, will actually bond to high nitrate water and may reduce entirely, the need for nitrogen. In addition, if your irrigation water tests over 10ppm or mg/L you should take advantage of the useable nitrogen in the water. E3Expander™ aids in fruit, foliar and systemic applications. You can find more information at the University of California Department of Natural Resources: http://ucanr.edu/blogs/blogcore/postdetail.cfm?postnum=9361

AGRICULTURE USE: After thoroughly mixing E3Expander™ with water, at the appropriate dilution ratio, add fertilizer while continuing agitation/recirculation to allow proper dispersion of ingredients in the dilutedE3Expander™ matrix. Most agriculture equipment with either in-tank mixing or tank to pump recirculation will suffice. Regardless of method of application, thorough wetting of all surfaces must be accomplished for best results when spraying the product with fertilizer.

Using E3Expander™ in-furrow/side-by-side/strip-till application will hold fertilizer in place longer, reduce runoff, and make fertilizer more readily available for systemic absorption to the plant. You do not need to reduce the fertilizer application rate when using E3Expander™ in these applications.

In the case of spraying the product topically you must reduce the application rate by 30%. See following mixing directions for greater detail in mixing and spraying E3Expander™

In the event of high nitrate water conditions (10.0ppm or mg/l or higher) E3Expander™ can in extreme case (above 50ppm or 50 mg/L) reduce or possibly eliminate the need for additional nitrogen. In high nitrate water conditions E3Expander™ will bond with the existing nitrates to make them available to the plants. The amount of nitrogen available from irrigation water can be estimated by taking the nitrate concentration times 2.72 for each 12” depth of water applied. Consult your agronomist for best results.

Evaluation of chemical compatibility including consistency is the sole responsibility of the user. For further information, please refer to the MSDS, available at www.e3expander.com

PRODUCT EXPIRES 1 YEAR FROM DATE OF MANUFACTURE

E3Expander™ Fertilizer Application Formula SDS

Back to Top
Translate »